LandscapingHobart
2026 PricesPer Sqm RatesAll Finishes

Concrete Driveway Cost Hobart — 2026 Price Guide

Planning a new concrete driveway for your Hobart home? Understand indicative per-sqm costs for plain, exposed aggregate and stamped concrete — plus typical total project costs — before requesting free quotes from local contractors.

Get Free QuotesAll Cost Guides

Price Disclaimer: Prices are indicative only and will vary based on scope, materials, access, location, and individual contractor pricing. Request free quotes for accurate pricing.

Concrete Driveway Costs in Hobart — What to Expect

A concrete driveway is one of the most durable and cost-effective property improvements for Hobart homes. Unlike asphalt (which softens in summer and requires periodic resurfacing), concrete driveways are low-maintenance and can last 30–50+ years when properly installed.

For a standard single concrete driveway in Hobart (30–40sqm), budget $1,800–$3,600 for plain concrete or $2,400–$5,200 for exposed aggregate. A double driveway (50–70sqm) in exposed aggregate typically costs $4,000–$9,100. These are indicative ranges — complex sites, steep grades, or premium finishes will push costs toward the upper end.

Site preparation is a significant cost component. Proper sub-base compaction is critical in Hobart — particularly in areas with clay-heavy soils or where previous soft fill has been placed. Don't accept quotes that don't include proper sub-base preparation, as inadequate preparation is the primary cause of concrete cracking.

Concrete Driveway Cost by Finish — Hobart 2026

Installed cost per sqm includes concrete supply and pour, reinforcement and finishing. Sub-base preparation is typically additional (see project cost table below).

Plain (Broom-Finish)

$60 – $90/sqm
Appearance
Functional, basic texture
Slip Resistance
Good
Maintenance
Seal every 5–8 years
Best For
Budget-conscious projects, rear/side access

Exposed Aggregate

$80 – $130/sqm
Appearance
Attractive — stone surface visible
Slip Resistance
Excellent
Maintenance
Seal every 5–8 years
Best For
Front driveways, most residential applications

Stamped / Decorative

$90 – $150/sqm
Appearance
Premium — mimics stone, brick or slate
Slip Resistance
Good (texture dependent)
Maintenance
Re-seal every 3–5 years
Best For
Premium properties, feature driveways

Coloured Concrete

$80 – $130/sqm
Appearance
Custom colour — earthy tones popular
Slip Resistance
Good (finish dependent)
Maintenance
Seal to protect colour
Best For
Design-conscious homes, colour-coordinated landscaping

Typical Driveway Project Costs — Hobart 2026

All-inclusive project cost estimates including sub-base preparation, concrete, reinforcement and finishing. Indicative only.

ProjectIndicative Total
Single car driveway (30–40sqm) — plain concrete$1,800 – $3,600
Single car driveway (30–40sqm) — exposed aggregate$2,400 – $5,200
Double driveway (50–70sqm) — plain concrete$3,000 – $6,300
Double driveway (50–70sqm) — exposed aggregate$4,000 – $9,100
Double driveway (50–70sqm) — stamped concrete$4,500 – $10,500
Council crossover / kerb cut$800 – $2,000
Concrete driveway sealing$5 – $15/sqm

* Indicative costs only for Hobart, Tasmania (2026). Costs vary based on site conditions, access and contractor.

Money-Saving Tips for Concrete Driveways in Hobart

  • Get 3+ quotes — concrete driveway pricing varies considerably between contractors.
  • Plain concrete with a quality broom finish is entirely adequate for most functional driveways.
  • Ensure any quote includes proper sub-base preparation — the cost to repair a poorly prepared driveway far exceeds the saving.
  • Check crossover/permit requirements with your council before work commences.
  • Concrete poured in mild weather (spring/autumn) performs best — avoid extreme heat or frost days.
  • Seal your driveway 28 days after pouring and every 5–8 years to significantly extend its life.

Concrete Driveway Cost FAQs — Hobart

A concrete driveway in Hobart typically costs $3,000–$9,000 for a standard 40–60sqm single driveway. Per sqm rates are: plain concrete $60–$90/sqm, exposed aggregate $80–$130/sqm, and stamped/decorative concrete $90–$150/sqm. Total cost depends on driveway size, concrete finish, site preparation requirements and any additional features like crossovers, kerb cuts or drainage. Prices are indicative — request free quotes for your specific project.
Exposed aggregate concrete is the most popular driveway finish in Hobart for good reason — it provides a non-slip textured surface, looks attractive, and performs well in Tasmania's wet and frosty conditions. Plain broom-finished concrete is the most affordable option and still durable. Stamped/decorative concrete offers premium aesthetics at higher cost. Avoid polished or smooth finishes for driveways as they become slippery when wet.
Residential concrete driveways in Hobart should be a minimum of 100mm thick (standard vehicles) or 125–150mm for heavier vehicles like trucks or caravans. Sub-base compaction is equally important — a properly compacted road base of 100–150mm beneath the concrete is essential, particularly in Hobart's clay-heavy soils and frost-prone areas. Adequate concrete thickness and reinforcement prevents cracking and extends driveway life significantly.
A properly installed concrete driveway should last 30–50+ years in Hobart conditions. The primary threats to longevity are frost heave (less common in central Hobart, more of an issue at higher elevations), tree root intrusion, and oil staining from vehicles. Concrete driveways can be sealed to protect against staining and improve durability — sealing typically costs $5–$15/sqm and should be reapplied every 5–8 years.
A new driveway crossover (the section connecting your driveway to the road) typically requires a road opening permit from Hobart City Council or your local council. Costs are approximately $100–$400. Modifying an existing driveway within your property boundary generally doesn't require a permit, but check with your council before commencing if you're unsure. Your concrete contractor should be familiar with local crossover requirements and may handle the permit process.
In most cases, yes. Exposed aggregate adds $20–$50/sqm over plain concrete but provides a significantly better-looking finish with better slip resistance — particularly valuable in Hobart's wet climate. For a 50sqm driveway, the premium is approximately $1,000–$2,500. The added kerb appeal and practical safety benefits make exposed aggregate one of the most popular driveway upgrades for Hobart homeowners. Get quotes for both finishes to compare.

Related Cost Guides & Services

Paving Cost →Landscaping Cost →All Cost Guides →Find a Landscaper →

Get Accurate Concrete Driveway Quotes for Your Hobart Property

Connect with qualified concrete contractors in Hobart and receive free, obligation-free quotes matched to your finish preference, driveway size and site.

Get Free Quotes Now
Get Free Quotes

Sarah from Sandy Bay just requested landscaping quotes